| Serial number |
Material |
Standards/Regulations |
Test Method |
| 1 |
Plastic materials and products (general requirements) (see below for special requirements for each material) Finished products |
GB4806.7-2016 |
|
| |
| GB 31604.1-2016& GB5009.156-2016& GB31604.8-2016 |
| GB31604.2-2016 |
| GB31604.9-2016 |
| GB31604.7-2016 |
| 2 |
Polycarbonate PC |
GB4806.7-2016 |
|
| GB 31604.10-2016 |
| GB 31604.46-2016 |
| 3 |
Polystyrene PS |
GB 4806.7-2016 |
|
| GB31604.12-2016 |
| 4 |
AS |
GB 4806.7-2016 |
|
| GB 31604.17-2016 |
| 5 |
ABS |
GB 4806.7-2016 |
|
| GB 31604.17-2016 |
| GB31604.12-2016 |
| 6 |
PVC |
GB 4806.7-2016 |
|
| GB31604.31-2016 |
| 7 |
Polyethylene terephthalate (PET) |
GB 4806.7-2016 |
|
| GB 31604.44-2016 |
| GB 31604.21-2016 |
| 8 |
Polyamide (nylon) PA6 |
GB 4806.7-2016 |
|
| GB31604.19-2016 |
| 9 |
Polyformaldehyde POM |
GB 4806.7-2016 |
|
| GB 31604.48-2016 |
| 10 |
Epoxy resin |
GB 4806.7-2016 |
|
| GB 31604.10-2016 |
| 11 |
PAN |
GB 4806.7-2016 |
|
| GB 31604.17-2016 |
| GB 31604.12-2016 |
| 12 |
Melamine-formaldehyde (melamine) MF |
GB 4806.7-2016 |
|
| GB 31604.15-2016 |
| GB 31604.48-2016 |
| 13 |
Rubber materials and products |
GB4806.11-2016 |
|
| |
| GB 31604.1-2016& GB5009.156-2016& GB31604.8-2016 |
| GB31604.2-2016 |
| GB31604.9-2016 |
| |
| 14 |
Nipples (not suitable for pacifiers) |
GB4806.2-2015 |
|
| |
| |
| GB31604.8-2016 |
| |
| GB31604.2-2016 |
| GB31604.9-2016 |
| GB31604.42-2016 |
| GB28482-2012 |
| GB28482-2012 |
| GB28482-2012 and GB/T24153-2009 |
| GB28482-2012 |
| 15 |
enamel |
GB4806.3－2016 |
|
| GB31604.34-2016 |
| GB31604.24-2016 |
| 16 |
ceramics |
GB4806.4-2016 |
|
| GB31604.34-2016 |
| GB31604.24-2016 |
| 17 |
Glass |
GB4806.5-2016 |
|
| GB31604.34-2016 |
| GB31604.24-2016 |
| 18 |
Metal materials and products |
GB4806.9-2016 |
|
| |
| GB31604.38-2016 or GB31604.49-2016 |
| GB31604.24-2016 or GB31604.49-2016 |
| GB31604.34-2016 or GB31604.49-2016 |
| GB31604.33-2016 or |
| GB31604.49-2016 |
| 19 |
Stainless steel products |
GB 9684 |
|
| 20 |
Food contact paper and paper board materials and products |
GB4806.8-2016 |
|
| |
| GB31604.49-2016 Part 1, ICP-MS Determination |
| |
| GB4806.8-2016 Extraction of Appendix A + GB31604.48-2016 |
| GB31604.47-2016 |
| GB31604.8-2016 |
| GB31604.2-2016 |
| GB31604.9-2016 |
| GB14934-1994 |
| GB14934-1994 |
| GB4789.15 |
| 21 |
Coatings and coatings (general requirements) (not applicable to paper coatings and coatings) See below for special requirements for each coating. |
GB4806.10-2016 |
|
| |
| GB 31604.1-2016& GB5009.156-2016& GB31604.8-2016 |
| GB31604.2-2016 |
| GB31604.9-2016 |
| |
| 22 |
Styrene or acrylic modified epoxy resin coating |
GB4806.10-2016 |
|
| GB 31604.10-2016 |
| 23 |
Epoxy polyamide resin coating |
GB4806.10-2016 |
|
| |
| 24 |
Polyformaldehyde resin coating |
GB4806.10-2016 |
|
| |
| 25 |
PTFE coating |
GB4806.10-2016 |
|
| |
| |
| |
| 26 |
PE resin (plastic resin (unformed raw material requirements))↓ |
GB4806.6-2016 |
|
| |
| GB31604.3-2016 |
| GB31604.6-2016 |
| GB31604.5-2016 |
| 27 |
PP resin (homopolymer) |
GB4806.6-2016 |
|
| GB31604.5-2016 |
| 28 |
PC resin (polymer of bisphenol A and carbonyl dichloride or diphenyl carbonate) (other types of PC consulting technical support) |
GB4806.6-2016 |
|
| GB 31604.10-2016 |
| GB 31604.46-2016 |
| GB31604.5-2016 |
| GB31604.2-2016 |
| GB31604.9-2016 |
| 29 |
PS resin (styrene homopolymer and copolymer with butadiene) |
GB4806.6-2016 |
|
| GB31604.3-2016 |
| GB31604.4-2016 |
| GB31604.5-2016 |
| GB31604.12-2016 |
| 30 |
Polyvinyl chloride resin (PVC) |
GB4806.6-2016 |
|
| GB31604.31-2016 |
| 31 |
Polyethylene terephthalate alcohol ester resin (PET) |
GB4806.6-2016 |
|
| GB 31604.34-2016 or GB31604.49-2016 |
| GB31604.5-2016 |
| GB 31604.41-2016 or GB31604.49-2016 |
| GB 31604.44-2016 |
| GB 31604.21-2016 |
| 32 |
Polyamide (nylon) resin (PA6) |
GB4806.6-2016 |
|
| GB31604.19-2016 |
| 33 |
AS resin |
GB4806.6-2016 |
|
| GB 31604.17-2016 |
| 34 |
ABS resin |
GB4806.6-2016 |
|
| GB 31604.17-2016 |
| GB31604.12-2016 |
| 35 |
Polyformaldehyde resin POM |
GB4806.6-2016 |
|
| GB 31604.48-2016 |
| 36 |
Bisphenol A Epoxy Resin |
GB4806.6-2016 |
|
| GB 31604.46-2016 |
| 37 |
PAN resin |
GB4806.6-2016 |
|
| GB 31604.17-2016 |
| GB31604.12-2016 |
| 38 |
PTFE |
GB4806.6-2016 |
|
| |
| 39 |
Melamine Formaldehyde resin MF |
GB4806.6-2016 |
|
| GB 31604.15-2016 |
| GB 31604.48-2016 |
| 40 |
Enamel products |
GB4806.3-2016 |
|
| |
| |
| |
| |
| 41 |
Ceramic products |
GB 13121-1991
|
|
| |
| |
| |
| |
| |
| 42 |
Glass product limit |
GB4806.5-2016 |
|
| |
| |
| |
| |
| |
| 43 |
Stainless steel |
Boil for 30 minutes and then leave at room temperature for 24 hours |
|
| Aluminum and aluminum alloy (except for food utensils) |
Boil for 30 minutes and then place at room temperature for 24 hours |
|
| Aluminum and aluminum alloy food utensils |
After the boiled food simulant comes into contact with the sample, it is left at room temperature for 24 hours |
|
| Uncoated iron frying pan |
Select according to Table A.3 of GB4806.9-2016. |
|
| Other metal materials (contact acidic foods, PH <5) |
Select according to GB4806.9-2016 Table A.3 |
|
| Other metal materials (contact with non-acid foods, PH ≥5) |
Select according to GB4806.9-2016 Table A.3 |
|
| Special statement: Chemical tests are destructive tests and samples need to be disassembled and cannot be restored. |
Whatsapp